Do you know the key points of wood door and window

2022-07-22
  • Detail

Many family windows are made of aluminum alloy, but some families also began to choose wooden windows. Due to different materials, the decoration standards and requirements are also different. Today, Xiaobian will tell you how to decorate uncommon wooden windows

many family windows are made of aluminum alloy, but some families also began to choose wooden windows. Due to different materials, the decoration standards and requirements are also different. Today, Xiaobian will tell you how to decorate uncommon wooden windows

first, paint film quality standard

the surface paint film of wooden windows should be smooth and bright, free of quality defects such as sagging, bubbles, wrinkles, and corrosion points, dead joints, and broken; The wood used for window covering should be coordinated with the wood and color of door and window leaves. The color difference between the decorative panel and the wood line should not be large, and the tree species should be the same

second, the window frame should be square and seamless

the window sash should be square and not warped and deformed. The window sash can just be inserted into the door and window frame and coincide with the window frame. If the gap between the window sash and the frame is large, it is mainly because the window frame is not planed correctly during installation or the window frame is not perpendicular to the ground, the window sash can be removed and planed again. If the window frame is not vertical, the gasket in the frame plate should be aligned

third, hinge installation requirements

the hinge should be located accurately and installed firmly. If the hinge is not aligned, it will cause the window sash to be inconsistent with the frame sleeve, and the window switch will not be smooth. You can unscrew a screw from each hinge first, then adjust the fit between the window sash and the frame, and then tighten all screws after adjustment and repair. If the hinge screws are short, or the screws are screwed in at one time, and the screws are not screwed in, or the screws are twisted obliquely, it will cause the window sash to hit. Appropriate screws should be replaced. The screws must be straight when they are installed. The screws should be screwed in 1/3 first, and the rest should be screwed in

fourth, the treatment of window cover base material

there should be base material in the window cover. When the window cover is made of blockboard or density board, the base plate should be fixed on the base keel of the window frame first, and then nailed with lines; Knock the side panel of the window sleeve by hand. If an empty drum sounds, it means that the bottom layer is not padded with Blockboard and other base plates, which should be folded and redone

warm tips: for more practical decoration knowledge and follow-up photos of real scenes on the construction site, please pay attention to your palm (wechat: mall_jia)

沈阳手足外科医院

泉州男科医院

郑州不孕不育医院

南京银屑病医院

Copyright © 2011 JIN SHI